Share this page:
Customer Feedback, The Motion Control Company

Products

About Us

Knowledge Center

Accessories

Terms of Use

Featured Products

Site Map

Videos

Contact Us


Comments from a few of our customers:

Automated CD/DVD Disc Polishing Machine

Video
(6.9 MB, 2 Minutes, Requires Quick Time Player)
A year after integrating the Allegro controller into the disc polishing
machine, the results have been impressive.  The Allegro controller has
been one of the most dependable components, performing flawlessly
through the polishing of tens of thousands of discs.  We now have the
Allegro designed in to our production machines.


SGM Design Labs LLC
Fiber Glass Wrapping Machine

Video (9.5 MB, 30 Seconds, Requires Windows Media Player)


 

At TubeX  we did have some ideas of CNC-winding a fiber glass around our mufflers inner core's.

For this daring project we searched for a control-, drive-system which was not too expensive, as that the outcome could be a total failure. At Optimal Engineering Systems, Inc. Systems we found the ALLEGRA control-, drive system we were looking for.

We did successfully complete the project, and can say that the system runs more than twice as fast as set out for. In general it's a small and very dynamic lathe where we wind a fiber glass from a reel onto an inner core.

We are very satisfied with their pre- and after-sales and services.

Actually we are that satisfied that we ordered a second system for upgrading a conventional profile bender into a CNC profile bender.

Mr. Jos Hummelink
Owner

Laser Repair SystemL4400D.jpg (41211 bytes) Your service to customer excellent like the system we bought, three are working good, reliable, low cost, I am very satisfy with your product.

Mr. Long Tran
VP of Engineering
We use the OES 3-axis programmable motion control system to control a customized microscope stage designed to hold 200 mm diameter semiconductor wafers. The stage is controlled either with the OES joystick or programmable with function Click to Get a Quotes through the RS232 interface.

Dr. Jim T.

 

We need to transfer wafer in a ultrahigh vacuum chamber from one to another. Space and precision are what we care about.

We need an automatic system to accomplish this task, in which case two stepper motors are needed. One is for linear motion of the transfer arm, the other for rotation of the arm.

The service from the company is good, as well as the quality of the products.

Mr. Hongtao S.
We have used the 2-axis programmable motion control system from OES for our research project. The project was to build a sun simulator.

We wanted to simulate the motion of sun around the earth for a particular day, time and location. This is used for the real time verification of Building Integrated PhotoVoltaic System simulated on computer using software packages.

Optimal Engineering Systems, Inc. Systems has a very good customer support and their guidance throughout the project duration is appreciable.

Ms. Shveta K.
Ms. Vanessa T.
Ms. Mary R.

 

Share this page:

 

Home | Products | Accessories | Knowledge Center | About Us | Terms of Use |Testimonials | Featured Products |Site Map | Videos | Contact Us