Products

About Us

Knowledge Center

Accessories

Terms of Use

Featured Products

Site Map

Videos

Contact Us

Manual Linear Positioning Stage

Home > Manual Stages > Z-axis Stage > Rack and Pinion

Manual Linear Positioning Stage Picture

This manual rack and pinion positioning is made of brass alloy with an black fluororesin finished.

The bench size is 25 X 25 mm has a body weight of 0.08 kgf.

The drive mechanism is worm and worm gear. The worm gear ratios is ≈8 per revolution of knob.

The maximum load of this rack and pinion table is 1.0 kgf.

The distance of travel is +/- 2.5 mm.

The movement accuracy straightness is 30 Ám.

The minimum reading is 0.1 micro-meter with indicator scale.

Specifications

Unit: mm
Model No. Table
Size
Movement accuracy
straightness
Load capacity
(kg)
Weight
(kg)
Material Surface
finish
Travel Distance Travel Distance per 
Rev. of Knob
Minimum reading
indicator

 MC3B-25

25 by 25 30 μm 1.0 0.08 Brass alloy Black fluororesin finished +/- 2.5 ≈8 0.1mm/indicator

Mechanical Drawing

Manual Linear Positioning Stage Mechanical Drawing
MC3B-25

 Ordering Information

Part No. Description Amount
MC3B-25 Manual Stage, Z-axis Stage, Rack and Pinion, Range of Travel +/- 2.5 mm Click to Get a Quote

Share this page:

 

Home | Products | Accessories | Knowledge Center | About Us | Terms of Use |Testimonials | Featured Products |Site Map | Videos | Contact Us