Products

About Us

Knowledge Center

Accessories

Terms of Use

Featured Products

Site Map

Videos

Contact Us

Motorized XY Table

Home > Motorized XY Stages

Motorized  Two-axis Table, Range of Travel: 200 mm x 300 mm

Specifications
Type

AU200-200X300

Structure Description

Range of Travel

200 mm x 300 mm

Table Size 434 mm x 534 mm
Aperture Size

222 mm x 272 mm

Actuator Type Lead Screw (4 mm per turn)
Travel Guide

Precision V-groove & Crossed Roller

Base Material Aluminum Alloy
Surface Treatment Black Anodized
Load capacity 20 kg
Weight 22.5 kg

Typical Accuracy Description

Resolution 20 microns (Full Step)
1 micron (20 Micro-steps per Step Motor Driver in use)
Repeatability 2 microns
Positional Accuracy 3 microns
Straightness 5 microns
Backlash 2 microns
Stepper Motor
 
Typical Phase Resistance 3.8 Ohms,  Bi-directional
Typical Phase Current 1 Amp
DB-9 Male Connector
Pin Assignment and Description

1

+5 VDC

2

CCW Limit Switch, Open Collector, Normally Open, Needs Pull up Resistor

3

CW Limit Switch, Open Collector, Normally Open, Needs Pull up Resistor

4

Common

5

Not Connected

6 Stepper Motor Phase A+
7 Stepper Motor Phase A-
8 Stepper Motor Phase B+
9 Stepper Motor Phase B-

 

Accessories Description

Servo Motor

Optical Encoder

Stepper Motor Driven Mechanical Drawing

Two-axis Stage, Range of Travel: 200 mm x 300 mm, Aperture Size 222 mm x 272 mm

 

Ordering Information

 

Part No. Description Amount
AU200-200X300-01 Stepper Motor Driven Linear Two-axis Stage, Range of Travel: 200 mm x 300 mm, Aperture Size 222 mm x 272 mm Click to Get a Quote
AU200-200X300-02 Three Phase Brushless Servo Motor with Quadrature Incremental Optical Encoder Driven Linear Two-axis Stage, Range of Travel: 200 mm x 300 mm, Aperture Size 222 mm x 272 mm Click to Get a Quote
AU200-200X300-03 DC Servo Motor with Quadrature Incremental Optical Encoder Driven Linear Two-axis Stage, Range of Travel: 200 mm x 300 mm, Aperture Size 222 mm x 272 mm Click to Get a Quote
AU200-200X300-04 Stepper Motor Driven Linear Two-axis Stage  with 500 Cycles per Revolution Quadrature Optical Encoder Mounted at the back of the Stepper Motor, Range of Travel: 200 mm x 300 mm, Aperture Size 222 mm x 272 mm Click to Get a Quote

Related Products

OES Line of Motion Controllers Motion Controllers

Sharing link: