Hollow Core Motorized Rotary Stage

This hollow core motorized rotary stage is made of aluminum alloy with an elegant black anodized surface.

The drive mechanism is worm and worm gear. The worm gear ratio is 288:1.

It provides 360� of continuous rotation.

The maximum load of this rotary table is 65 Kg.

This 100 mm diameter rotary actuator has a body weight of 7.9 Kg.

The resolution of 0.000625� is achieved with a 10 micro-steps per step stepper motor driver. This rotation stage is also available with a servo motor and optical encoder.

The top plate mounted indicator shows the angle of rotation.

The knob mounted on the motor allows for manual adjustment. This knob may be replaced with an optical encoder for precision position verification.

This motorized stage is capable of continuous spinning.

This stage is compatible with OES' line of Motion Controllers..

Specifications

Type
AY110-300

Structure Description
Range of Travel
360� of continuous rotation

Stage Diameter 300 mm

Aperture Diameter 180 mm (7.087 in)

Transmission Ratio 288:1

Drive Mechanism
Worm Gear

Travel Guide Bearing

Stepper Motor 2 Phase Stepper Motor

Phase Resistance 2.5 Ohm

Typical Phase Current 3 Amps

DB-9 Male Connector

Pin Assignment and Description

1

+5 VDC

2

Not Connected

3

Not Connected

4

Common

5

HOME Switch, Open Collector, Normally Open, Needs 1K Pull up Resistor

6 Motor Phase A+

7 Motor Phase A-

8 Motor Phase B+

9 Motor Phase B-

Base Material Aluminum Alloy

Surface Treatment Black Anodized

Load Capacity 65 kg

Weight 7.9 kg

Typical Accuracy

Resolution 0.000625�
(10 Micro-Steps per Step Driver in use)

Repeatability 0.005�

Positional Accuracy 0.001�

Mechanical Drawing

Ordering Information

Part No.	Description	Amount
AY110-300-01	Stepper Motor Driven Motorized Rotary Stage, Stage Diameter: 300 mm, Load Capacity: 65 kg	Click to Get a Quote
AY110-300-02	DC Servo Motor Driven Motorized Rotary Stage, Stage Diameter: 300 mm, Load Capacity: 65 kg	Click to Get a Quote