About Us

Knowledge Center


Terms of Use

Featured Products

Site Map


Contact Us

Motorized Rotary Stage

Home > Motorized Rotary Stages 

This motorized rotary stage is made of aluminum alloy with an elegant black anodized surface.

The drive mechanism is worm and worm gear. The worm gear ratio is 90:1.

The maximum load of this rotary table is 30 Kg.

This 60 mm diameter rotary actuator has a body weight of 1.2 Kg.

The resolution of 0.002  is achieved with a 10 micro-steps per step stepper motor driver. This rotation stage is also available with a servo motor and optical encoder.

The top plate mounted indicator shows the angle of rotation.

The knob mounted on the motor allows for manual adjustment. This knob may be replaced with an optical encoder for precision position verification.

This motorized stage is capable of continuous spinning.

This stage is compatible with OES' line of Motion Controllers..




Structure Description

Range of Travel


Stage Diameter  60 mm
Transmission Ratio 90:1
Drive Mechanism

Worm Gear

Travel Guide Bearing
Stepper Motor Two-Phase Stepper Motor (1.8)
Phase Resistance  
Typical Phase Current  
DB-9 Male Connector
Pin Assignment and Description
1,2,3,4,5 Not Connected
6 Motor Phase A+
7 Motor Phase A-
8 Motor Phase B+
9 Motor Phase B-
Base Material Aluminum Alloy
Surface Treatment Black Anodized
Load Capacity 30 kg
Weight 1.2 kg

Typical Accuracy

Resolution 0.002 (non Micro-step)
 0.001=3.6'' (20 Micro-steps per Step Motor Driver in use)
Repeatability 0.005
Positional Accuracy 0.01
Backlash 0.005
Maximum Speed 30 degrees per second

Mechanical Drawing

 Ordering Information

Part No. Description Amount
AY110-60-01 Stepper Motor Driven Rotary Stage Click to Get a Quote
AY110-60-02 Three Phase Brushless Servo Motor Driven Rotary Stage Click to Get a Quote

Related Products
Motion Controllers
Sharing link:


Home | Products | Accessories | Knowledge Center | About Us | Terms of Use |Testimonials | Featured Products |Site Map | Videos | Contact Us