Products

About Us

Knowledge Center

Accessories

Terms of Use

Featured Products

Site Map

Videos

Contact Us

Motorized Z-axis Linear Positioning Stage

Home > Motorized Vertical Single-axis Stages

Motorized Linear Vertical Stage, Range of Travel 20 mm

This Z-axis vertical positioning is made of aluminum alloy.

The stage size is 90X90 mm.

The range of travel is 20 mm.

The load capacity is 5 kg.

The resolution is 0.1 microns / 0.05 microns  with 10 / 20 micro-step per step motor driver.

The typical repeatability accuracy is ±0.5 microns.

The typical positioning accuracy is 10 microns.

The maximum speed is 5 mm / sec.

Specifications
 
Part No.. Axis Table Size (mm) Range of Travel (mm) Load Capacity (kg) Typical Repeatability Accuracy Typical Positioning Accuracy Maximum Speed

 AZV9020

Z 90x90 20 5 ±0.5 microns 10 microns 5

Specifications
Type

AZV9020

Structure Description

Travel

20 mm

Table Size 90 mm 90 mm
Belt Ratio 0.2 mm per motor turn
Travel Guide

High Precision Crossed Roller

DB-15 Male Connector

 

Two-Phase Stepper Motor (1.8)  
Typical Phase Resistance 2.7 Ohms, Bi-directional
Typical Phase Current 1.5 Amp
Electrical Connection
Pin No. Description
1 Stepper Motor Stepper Motor Phase A+
2 Stepper Motor Stepper Motor Phase A-
3 Stepper Motor Stepper Motor Phase B+
4 Stepper Motor Stepper Motor Phase B-
5 Not Connected
6 Lower End Limit Switch, Open Collector, Normally Low, Active High, Needs Pull up Resistor, 1 KOhm to +5 VDC
7 Upper End Limit Switch, Open Collector, Normally Low, Active High, Needs Pull up Resistor, 1 KOhm to +5 VDC
8 Not Connected
9

+5 VDC Power Input

10 Home Switch, Open Collector, Middle of Stroke, Width 4.5 mm,  Needs Pull up Resistor, 1 KOhm to +5 VDC
11

+5 VDC Power Input Common, Return, Ground

12 Chassis
13 Not Connected
14 Not Connected
15 Not Connected
 
Body Material Aluminum Alloy
Surface Treatment Black Anodized
Load capacity 5 kg
Weight 1.7 kg

Typical Accuracy

Resolution 0.1 μ (10 Micro-steps per Step Motor Driver in use)
Maximum Speed with Stepper Motor 5 mm / sec
Positioning Accuracy 10 μ

Accessories Description

Typical Repeatability Accuracy

0.5 microns
Optical Encoder
 



 

 

Mechanical Drawing

Mechanical Drawing of Motorized Linear Vertical Stage, Range of Travel 20 mm
 

 Ordering Information

Part No. Description Amount
AZV9020 Stepper Motor Driven Linear Vertical Linear Positioning Stage, Range of travel, 20 mm Click to Get a Quote

Sharing link:


 

Home | Products | Accessories | Knowledge Center | About Us | Terms of Use |Testimonials | Featured Products |Site Map | Videos | Contact Us