Products

About Us

Knowledge Center

Accessories

Terms of Use

Featured Products

Site Map

Videos

Contact Us

Three-axis Yaw, Pitch and Roll Stage

Home > Motorized Yaw, Pitch and Roll Stages  


 

The YPR-45-15-60 Motorized Three-axis Stages require a Motion Controller that can be ordered as a complete plug-and-play system with  joystick, trackball, and keypad.

Specifications

 

YPR-45-15-60

Total Weight

3.5 kg (7.7 lb)

Load Capacity

4.0 kg (8.8 lb)

Base Material

Aluminum Alloy

Surface Treatment

Black Anodized

 

 

Typical Phase Resistance 3.8 Ohms, Bi-directional
Typical Phase Current 1 Amp
DB-9 Male Connector
Stepper Motor
Pin Assignment and Description

1

+5 VDC

2

CCW Limit Switch, Open Collector, Normally Open, Needs Pull up Resistor (Pitch and Roll Axes)

3

CW Limit Switch, Open Collector, Normally Open, Needs Pull up Resistor

4

Common (Pitch Axis)

5

HOME Switch, Open Collector, Normally Open, Needs 1K Pull up Resistor (Roll Axis)

6 Stepper Motor Phase A+
7 Stepper Motor Phase A-
8 Stepper Motor Phase B+
9 Stepper Motor Phase B-
   
   
 
 

Yaw (Upper) Axis

Structure Description

Gear Ratio 90:1
Drive Mechanism

Worm Gear

Travel Guide Bearing

Typical Accuracy

Resolution 0.002 degrees  (10 micro-steps per step stepper motor driver in use)
Repeatability +/-0.01 degrees
Positional Accuracy 0.05 degrees
Maximum Speed with Stepper Motor 30 degrees per second
Maximum Speed with Servo Motor 90 degrees per second
 

Roll (Middle) Axis

Structure Description Range of Travel

+/-15 degrees

Table Size 65 mm x65 mm
Gear Ratio 1° (stage) : 252° (motor)
Drive Mechanism Worm Gear
Travel Guide Crossed-roller Guide

Typical Accuracy

Resolution Stepper Motor Driver or Servo Motor Optical Encoder Dependent
Repeatability +/-0.01 degrees
Positional Accuracy 0.05 degrees
Maximum Speed with Stepper Motor 14 degrees per second
Maximum Speed with Servo Motor 45 degrees per second 
 

Pitch (Lower) Axis

Structure Description Range of Travel

+/-45 degrees

Gear Ratio 1° (stage) : 296° (motor)
Drive Mechanism Worm Gear
Travel Guide Crossed-roller Guide

Typical Accuracy

Resolution Stepper Motor Driver or Servo Motor Optical Encoder Dependent
Repeatability +/-0.01 degrees
Positional Accuracy 0.05 degrees
Maximum Speed with Stepper Motor 14 degrees per second
Maximum Speed with Servo Motor 45 degrees per second 

 

Stepper Motor Driven Mechanical Drawing (Roll Table)


Ordering Information

Part No. Description Amount
YPR-45-15-60-01 Three-axis Stepper Motor Driven Yaw, Pitch and Roll Stage, Table Size 65x65 mm Click to Get a Quote
YPR-45-15-60-02 Three-axis Three Phase Brushless Servo Motor with Quadrature Incremental Optical Encoder Driven Yaw, Pitch and Roll Stage, Table Size 65x65 mm Click to Get a Quote
YPR-45-15-60-03 Three-axis DC Servo Motor with Quadrature Incremental Optical Encoder Driven Yaw, Pitch and Roll Stage, Table Size 65x65 mm Click to Get a Quote
YPR-45-15-60-04 Three-axis Stepper Motor Driven Yaw, Pitch and Roll Stage with 500 Cycles per Revolution Quadrature Optical Encoder Mounted at the back of the Stepper Motor, Table Size 65x65 mm Click to Get a Quote

 

Related Products
Motion Controllers

Sharing link:

 


 

Home | Products | Accessories | Knowledge Center | About Us | Terms of Use |Testimonials | Featured Products |Site Map | Videos | Contact Us