Hollow Core Motorized Vertical Rotation Stage

Home > Motorized Rotary Stages

This vertical hollow core motorized rotary stage with an elegant black anodized surface is made of aluminum alloy .

The vertical plate mounted indicator shows the angle of rotation. The knob mounted on the motor allows for manual adjustment. This knob may be replaced with an optical encoder for precision position verification.

This 59 mm diameter rotary actuator with a 30 mm diameter hollow core has a body weight of 0.7 Kg.

The drive mechanism is worm and worm gear. The worm gear ratio is 180:1.

The maximum load of this rotary table is 1 Kg.

The resolution of 0.001� is achieved with a 10 micro-steps per step stepper motor driver.

This vertical rotation stage is also available with a servo motor.

This motorized stage is capable of continuous spinning.

This stage is compatible with OES' line of Motion Controllers..

Specifications

Type

AR59-AV

M
e
c
h
n
i
c
a
l

s
p
e
c
Table Diameter Size
2.322 in (59 mm)

Range of Travel 360�

Drive Mechanism Worm & Worm Gear

Through Hole Diameter 1.181 in (30 mm)

Lead Type
Deep - Groove Ball Bearing

Reduction Ratio 180:1

Load 1 Kg

Body Weight 0.7 Kg

Material Aluminum Alloy

Surface treatment Black Anodized

T
y
p
i
c
a
l

A
c
c
u
r
a
c
y

2-phase
resolution
(pulse) Resolution (Full Step) 0.004�

Micro Stepping(1/10 step) 0.0004�

Single-direction positioning precision +/- 0.05�

Repeatability Position Precision +/- 0.01�

Mechanical Drawing

Electrical Connection

Pin No.	Description
Two-Phase Stepper Motor (1.8�)
Phase Resistance	5.6 Ohm, Bi-directional
Typical Phase Current	0.67 Amp

DB-15 Male Connector

Pin No.	Description
1	Stepper Motor Motor Phase A+
2	Stepper Motor Motor Phase A-
3	Stepper Motor Motor Phase B+
4	Stepper Motor Motor Phase B-
5	Not Connected
6	Not Connected
7	Not Connected
8	Not Connected
9	Not Connected
10	Not Connected
11	Not Connected
12	Not Connected
13	Not Connected
14	Not Connected
15	Not Connected