|
| |
Motorized Single-axis Table
|
 |
Home >
Motorized Linear
Stages
>
Low Cost Linear
Single-axis Stages |
 |
|
|
|
This
motorized
positioning table
is made of
aluminum
alloy with
an elegant
black
anodized
surface.
It provides
15 mm of
travel at
a maximum
speed of
5 mm per
second.
The drive
mechanism is
lead screw.
The bench
size is 65 X
65 mm and has a
body weight
of 1.2 Kg.
The maximum
load of this
stage
table is 10
Kg.
This linear stage is also available with a servo motor and optical encoder.
The knob mounted on the motor allows for manual adjustment. This knob may be replaced with an optical encoder for precision position verification.
This stage
is
compatible
with OES'
line of
Motion Controllers..
|
|
Specifications
| Type |
AQ110-15 |
|
Structure
Description |
Travel |
15 mm |
| Table Size |
65 mm × 65 mm |
| Lead Screw Pitch |
1 mm per turn |
| Travel Guide |
High Precision Crossed Roller |
| DB-9 Male Connector |
|
Two-Phase Stepper Motor |
|
Phase Resistance
|
3.8 Ohm, Bi-directional |
| Typical Phase Current |
1 Amp |
| |
|
Pin Assignment and Description |
| 1 |
+5 VDC for the Limit Sensors |
| 2 |
Positive Limit Switch
The table moves away from the motor
The knob turns counter clockwise
Open Collector
Normally Open
Needs Pull up Resistor (typically 1000 OHM)
|
| 3 |
Negative Limit Switch
The table moves towards the motor
The knob turns clockwise
Open Collector
Normally Open
Needs Pull up Resistor (typically 1000 OHM) |
| 4 |
Return for+5 VDC |
|
5 |
Not Connected |
|
6 |
Motor Phase A+ |
| 7 |
Motor Phase A- |
| 8 |
Motor Phase B+ |
| 9 |
Motor Phase B- |
|
| Body Material |
Aluminum Alloy |
| Surface Treatment |
Black Anodized |
| Load Capacity |
10 kg |
| Weight |
1.2 kg |
|
Typical Accuracy
|
Resolution |
0.25µ / Step (10 Micro-steps per Step Motor Driver in use)
0.125μ (20 Micro-steps per Step Motor Driver in use) |
| Maximum Speed |
5 mm / sec |
| Repeatability |
10 μ |
| Positional Accuracy |
10 μ |
| Straightness |
15 μ |
| Driving parallelism |
15 μ |
|
Backlash |
10 μ |
|
Accessories
Description
|
|
| Optical Encoder |
| Servo Motor (S) |
|
|
Mechanical Drawing
|
|
|
Ordering Information
|
Part No. |
Description |
Amount |
|
AQ110-15 |
Motorized Linear Single-axis Stage, Travel : 15 mm |
Click to Get a Quote |
|
|
