|
| |
Motorized Z-axis Linear Positioning Stage
|
|
Home >
Motorized Vertical Single-axis Stages |
|
These stages require a
Motion Controller that can be ordered as a complete plug-and-play system with RS-232, USB, joystick and keypad control.
Specifications
| Type |
BT-SN50 |
|
Structure
Description |
Travel |
50 mm |
| Table Size |
125 mm x 125 mm |
| Ratio |
0.794 mm per motor turn |
| Travel Guide |
Linear Guide |
|
DB-9 Male Connector
 |
| Two-Phase Stepper Motor (1.8 Deg) |
|
| Typical Phase Current |
1.3 Amp |
|
Electrical Connection |
| Pin No. |
Description |
| 1 |
+5 VDC for the Limit Sensors |
| 2 |
High Side Limit Switch
Open Collector or Normally Open
Needs Pull up Resistor (typically
1000 Ohms)
|
| 3 |
Low Side
Limit Switch
Open Collector or Normally Open
Needs Pull up Resistor (typically
1000 Ohms)
|
| 4 |
Return for+5 VDC |
| 5 |
Not Connected |
| 6 |
Stepper Motor Phase A+ |
| 7 |
Stepper Motor Phase A- |
| 8 |
Stepper Motor Phase B+ |
| 9 |
Stepper Motor Phase B- |
| |
|
| Body Material |
Aluminum Alloy |
| Surface Treatment |
Black Anodized |
| Load Capacity |
50 kg |
| Weight |
kg |
|
Typical Accuracy
|
Resolution |
0.397 microns (10 Micro-steps per Step Motor Driver in use)
|
| Maximum Speed with Stepper Motor |
5 mm / sec |
|
Typical Positioning Accuracy |
2 microns |
|
Accessories
Description
|
|
|
| Optical Encoder |
| |
|
|
|
Stepper Motor Driven Mechanical Drawing
|
|
|
Ordering Information
|
Part No. |
Description |
Amount |
|
BT-SN50-01 |
Stepper Motor Driven Linear Vertical Linear Positioning Stage,
Load Capacity
50 kg,
Range
of travel, 50 mm |
Click to Get a Quote |
|
|
