|
| |
XY-theta Alignment Stage
|
|
Home >
XY-theta Alignment Stages
|
|
 |
The
XYR-50-100
Motorized XY-theta Stage is a high resolution, low profile, high load capacity, horizontal stage that can be easily integrated into any current or future application.
The precision ground screws provide 2.16 in x 2.16 in (50 mm x 50 mm) of travel in XY plane with high resolution and repeatability. The theta (rotary) axis range of travel is
+/-180 degrees.
Some applications for the three-axis alignment stage include: testing, inspection, assembly and sampling in a broad range of industrial, medical, semiconductor and research facilities.The stage is equipped with stepper motors. The X and Y axes incorporate the positive and negative limit switches. The rotary stage incorporates a HOME (INDEX) switch. The rotary stage is also available with servo motor. A solid core version is also available.
This stage requires a
Motion Controller
that can be ordered as a complete plug-and-play system with RS-232, USB, joystick, trackball, and keypad control.
|
Part No.. |
Table
Diameter (mm) |
Gear Ratio |
Range of Travel |
Load Capacity (kg)
|
Weight
(kg)
|
|
X |
Y |
θ |
X (mm) |
Y (mm) |
θ (Deg) |
|
XYR-50-100 |
100 |
1 mm per Motor Revolution |
1
mm
per Motor Revolution |
2° per Motor Revolution |
50 |
50 |
360 Continuous |
9 |
5.9 |
|
| Type |
XY Plane |
|
Structure
Description |
Range of Travel |
50 mm X 50 mm |
| Table Diameter |
100 mm |
| Actuator Type |
Lead Screw (1 mm per turn) |
| Travel Guide |
Precision V-groove & Crossed Roller |
| Motor |
Two Phase Stepper Motor (1.8°) |
| Base Material |
Aluminum Alloy |
| Surface Treatment |
Black Anodized |
| Load Capacity |
9 kg |
|
Typical Accuracy
Description
|
Resolution |
5 microns (Full Step)
0.12 5microns (20 Micro-steps per Step Motor Driver in use) |
| Repeatability |
1.5 microns |
| Positional Accuracy |
5 microns |
|
Accessories
Description
|
|
Servo Motor
Optical Encoder |
| Type |
Rotary axis |
|
Structure Description |
Range of Travel |
360 degrees |
| Stage Diameter |
100 mm |
|
Through Hole Diameter |
30 mm (Optional) |
| Gear Ratio |
180:1 |
| Drive Mechanism |
Worm Gear |
| Travel Guide |
Bearing |
| |
|
| Base Material |
Aluminum Alloy |
| Surface Treatment |
Black Anodized |
|
Typical Accuracy
|
| Resolution |
0.001 degrees = 3.6 arcsec (10 Micro-steps per Step Motor Driver in use) |
| |
|
| Maximum Speed with Stepper Motor |
12 degrees per second |
| Maximum Speed with Servo Motor |
45 degrees per second |
| Positional Accuracy |
0.05 degrees |
| Repeatability |
+/-0.01 degrees
|
Electrical Connection
Two-Phase Stepper Motor (1.8°) Typical Phase Current: 1.0 Amp
DB-9
Male Connector ,
X and Y axes
|
Pin No. |
Description |
|
1 |
+5 VDC for the Limit Sensors |
|
2 |
CCW Limit Switch
The table moves away from the motor
The knob turns counter clockwise
Open Collector
Normally Open
Needs Pull up Resistor (typically 1000 Ohms)
|
|
3 |
CW Limit Switch
The table moves towards the motor
The knob turns clockwise
Open Collector
Normally Open
Needs Pull up Resistor (typically 1000 Ohms) |
|
4 |
Return for+5 VDC |
|
5 |
Not Connected |
|
6 |
Stepper Motor Phase A+ |
|
7 |
Stepper Motor Phase A- |
|
8 |
Stepper Motor Phase B+ |
|
9 |
Stepper Motor Phase B- |
DB-9
Male Connector ,
Rotary axis
|
Pin No. |
Description |
|
1 |
+5 VDC
Input |
|
2 |
Not Connected |
|
3 |
Not Connected |
|
4 |
Common |
|
5 |
HONE (INDEX) Signal
Open Collector
Normally Open
Needs Pull up Resistor (typically 1000 Ohms) |
|
6 |
Stepper Motor Stepper Motor Phase A+ |
|
7 |
Stepper Motor Stepper Motor Phase A- |
|
8 |
Stepper Motor Stepper Motor Phase B+ |
|
9 |
Stepper Motor Stepper Motor Phase B- |
Rotary axis
Stepper Motor Driven Mechanical Drawing - 100 mm
 |
|
|
Ordering Information
|
Part No. |
Description |
Amount |
|
XYR-50-100-01 |
Stepper Motor Driven
XY-Rotary Alignment Stage, Range of Travel,
X-axis 50 mm, Y-axis 50 mm, Rotary-axis 360 (Deg.
Continuous)
|
Click to Get a Quote |
|
XYR-50-100-04 |
Stepper Motor Driven
XY-Rotary Alignment Stage
with 500 Cycles per Revolution Quadrature Optical Encoder Mounted at the
back of the Stepper Motor, Range of Travel, X-axis 50 mm, Y-axis 50 mm, Rotary-axis 360 (Deg.
Continuous)
|
Click to Get a Quote |
|
|
