| |
Motorized Vertical Stage
|
Home
>
Motorized Vertical Single-axis Stages
|
The AT10-120 is a high resolution, low
profile, high load vertical lift stage that can be easily integrated into almost
any application.
The large 220 mm x 140 mm (8.7 in. 5.5 in.) drilled and tapped platform has a
vertical travel of 110 mm (4.3 in.). The twin lead (right and left hand thread)
precision ground screw and six guide rails provide smooth, flat (parallel to
mounting surface), vertical motion, with high resolution and repeatability.
Applications for the AT10-120 vertical lift stage include: testing, inspection,
assembly, sampling, laser drilling and machining in a broad range of industrial,
medical, semiconductor, and research facilities.
The AT10-120 low profile 90mm (3.54 in.) vertical stage is constructed of
black-anodized aluminum alloy and weighs just 6 kg (13.23 lbs). The powerful
2-phase NEMA 23 Stepper and inclined plane and scissor lift concept offers
higher load capacity to 10 kg (22 lbs) compared to vertically mounted stages,
and without the concern for cantilevered effects (loss of parallelism),
additionally, the moving platform has access from all four sides, and the base
plate has easy to access holes for mounting.
The increase in height is a
non-linear
function of rotation of the motor.
Key Features
-
Unique inclined plane concept delivers
110 mm of vertically motion in an ultra-low profile design
-
Higher Load Capacity compared to vertically mounted stages
-
Access to the moving platform from any side
This stage requires a
Motion Controller
that can be ordered as a complete plug-and-play system with RS-232, USB, joystick, trackball, and keypad control.
This product has been featured in the following
sites,
https://www.designnews.com
https://www.automation.com
https://www.photonics.com
|
Specifications
|
Type
|
AT10-120
|
Structure
Description
|
Range of Travel |
110 mm |
Table Size |
220 mm x140 mm
|
Actuator Type |
Grinding Screw |
Travel Guide |
Slide Rail |
Two Phase Stepper Motor
|
Typical Phase Resistance |
2.3 Ohms, Bi-directional |
Typical Phase Current |
2 Amp |
DB-9 Male Connector
|
Pin Assignment and Description
|
1
|
+5 VDC
|
2
|
Low End
Limit Switch, Open Collector, Normally Open, Needs Pull up Resistor
|
3
|
High End
Limit Switch
, Open Collector, Normally Open, Needs Pull up Resistor
|
4
|
Common
|
5
|
Not Connected
|
6
|
Stepper Motor Phase A+ |
7 |
Stepper Motor Phase A- |
8 |
Stepper Motor Phase B+ |
9 |
Stepper Motor Phase B- |
|
Base Material
|
Aluminum Alloy |
Surface Treatment
|
Black Anodized |
Load Capacity
|
10 kg |
Weight
|
6 kg |
|
|
|
Ordering Information
Part No.
|
Description
|
Amount
|
AT10-120-01
|
Stepper Motor Driven
Vertical Stage, Load Capacity:
10 kg, Range of Travel: 110 mm
|
Click to Get a Quote
|
AT10-120-02
|
Three Phase Brushless Servo Motor
with Quadrature Incremental Optical Encoder
Driven
Vertical Stage, Load Capacity
10 kg,
Range of Travel: 110 mm
|
Click to Get a Quote
|
AT10-120-03
|
DC Servo Motor with Quadrature Incremental Optical Encoder
Driven
Vertical Stage, Load Capacity
10 kg,
Range of Travel: 110 mm
|
Click to Get a Quote
|
AT10-120-04
|
Stepper Motor Driven Linear Stage
with 500 Cycle per Revolution Quadrature
Optical Encoder,
Load Capacity:
10 kg, Range of Travel: 110 mm
|
Click to Get a Quote
|
|
|