Products

About Us

Knowledge Center

Accessories

Terms of Use

Featured Products

Site Map

Videos

Contact Us

Motorized XY plus Vertical Goniometer Positioning Stages

Home > Assorted Motorized Multi-axis Actuators

Specifications

Structure Description

Linear Travel
Range of Travel (mm) Pitch of Lead Screw
15 1 mm per turn
30 1 mm per turn
50 1 mm per turn
75 1 mm per turn
Longer than 100 4 mm per turn
Goniometer's Range of Travel +/-10 Degrees

+/-15 Degrees

+/-45 Degrees

Travel Guide

High Precision Crossed Roller

Motor

 
Typical Phase Resistance 3.8 Ohms, Bi-directional
Typical Phase Current 1 Amp
DB-9 Male Connector
Pin Assignment and Description
1 +5 VDC for the Limit Sensors
2 CW Limit Switch, Open Collector, Normally Open, Needs Pull up Resistor (1000 Ohms)
3 CCW Limit Switch, Open Collector, Normally Open, Needs Pull up Resistor (1000 Ohms)
4 Return for+5 VDC
5 Not Connected
6 Stepper Motor Phase A+
7 Stepper Motor Phase A-
8 Stepper Motor Phase B+
9 Stepper Motor Phase B-
Body Material Aluminum Alloy
Surface Treatment Black Anodized

Typical Accuracy

Resolution Configuration Dependent
Maximum Speed 5 mm / sec
Repeatability 10 microns
Positional Accuracy 10 microns

Accessories Description

Optional Optical Encoders
Optional Servo Motors
Other Sizes and Strokes Available
 
Ordering Information
Part No. Description Amount
XYVG-xxxx-yyyy-gg-01 Stepper Motor Driven XY-axis plus Goniometer Stage

xxxx denotes the stroke of the X-axis in mm.
yyyy
denotes the stroke of the Y-axis in mm.
gg donates the goniometer's
total range of travel in degrees.
 

Click to Get a Quote
XYVG-xxxx-yyyy-gg-02 Three Phase Brushless Servo Motor with Quadrature Incremental Optical Encoder Driven XY-axis plus Goniometer Stage

xxxx denotes the stroke of the X-axis in mm.
yyyy
denotes the stroke of the Y-axis in mm.
gg donates the goniometer's
total range of travel in degrees.
 

Click to Get a Quote
     
XYVG-xxxx-yyyy-gg-03 DC Servo Motor with Quadrature Incremental Optical Encoder Driven XY-axis plus Goniometer Stage

xxxx denotes the stroke of the X-axis in mm.
yyyy
denotes the stroke of the Y-axis in mm.
gg donates the goniometer's
total range of travel in degrees.
 

Click to Get a Quote
XYVG-xxxx-yyyy-gg-04 Three Phase Brushless Servo Motor with Quadrature Incremental Optical Encoder Driven XY-axis plus Goniometer Stage with 500 Cycles per Revolution Quadrature Optical Encoder Mounted at the back of the Stepper Motors

xxxx denotes the stroke of the X-axis in mm.
yyyy
denotes the stroke of the Y-axis in mm.
gg donates the goniometer's
total range of travel in degrees.
 

Click to Get a Quote
     
     

 

Sharing link:


 

Home | Products | Accessories | Knowledge Center | About Us | Terms of Use |Testimonials | Featured Products | Site Map | Videos | Contact Us

                    facebook X linkedin youtube                      

contact-us