|
Specifications
| Type |
AZV9010 |
|
Structure
Description |
Travel |
20 mm |
| Table Size |
90 mm × 90 mm |
| Belt Ratio |
0.2 mm per motor turn |
| Travel Guide |
High Precision Crossed Roller |
|
DB-15 Male Connector
 |
| Two-Phase Stepper Motor (1.8°) |
|
| Typical Phase Resistance |
2.7 Ohms, Bi-directional |
| Typical Phase Current |
1.5 Amp |
|
Electrical Connection |
| Pin No. |
Description |
| 1 |
Stepper Motor Stepper Motor Phase A+ |
| 2 |
Stepper Motor Stepper Motor Phase A- |
| 3 |
Stepper Motor Stepper Motor Phase B+ |
| 4 |
Stepper Motor Stepper Motor Phase B- |
| 5 |
Not Connected |
| 6 |
Lower End Limit Switch, Open Collector, Normally Low, Active High, Needs Pull up Resistor, 1 KOhm to +5 VDC |
| 7 |
Upper End Limit Switch, Open Collector, Normally Low, Active High, Needs Pull up Resistor, 1 KOhm to +5 VDC |
| 8 |
Not Connected |
| 9 |
+5 VDC Power Input |
| 10 |
Home Switch, Open Collector, Low at Lower Half, High at Upper Half, Needs Pull up Resistor, 1 KOhm to +5 VDC |
| 11 |
+5 VDC Power Input Common, Return, Ground |
| 12 |
Chassis |
| 13 |
Not Connected |
| 14 |
Not Connected |
| 15 |
Not Connected |
| |
|
| Body Material |
Aluminum Alloy |
| Surface Treatment |
Black Anodized |
| Load Capacity |
5 kg |
| Weight |
1.7 kg |
|
Typical Accuracy
|
Resolution |
0.1 microns (10 Micro-steps per Step Motor Driver in use)
|
| Maximum Speed with Stepper Motor |
5 mm / sec |
| Positioning Accuracy |
10 microns |
|
Accessories
Description
|
Typical Repeatability Accuracy
|
±0.5 microns |
| Optical Encoder |
| |
|
