Products

About Us

Knowledge Center

Accessories

Terms of Use

Featured Products

Site Map

Videos

Contact Us

Motorized Two-axis Gimbal Mount, Elevation and Roll Axes
(Pitch and Roll Axes)

Home > Assorted Motorized Gimbal Mounts

Motorized Two-axis Gimbal Mount, Azimuth and Roll Axes



 

The gimbal mounts are used for general purpose pointing, scanning and tracking applications.

This gimbal mount is made of aluminum alloy with an elegant black anodized surface.

The transmission ratio is 180:1.

It provides 360° of continuous rotation on all axes for scanning.

The maximum load of this rotary table is 20 Kg.

The resolution of 0.001°  is achieved with a 10 micro-steps per step stepper motor driver. This rotation stage is also available with a servo motor and optical encoder.

The mounted indicators show the angle of rotations.

The knob mounted on the motor allows for manual adjustment.

Video Description

 

Specifications
Type

AU300-AR

Structure Description

Range of Travel

360° Continuous on Azimuth and Roll Axes

Table Size Diameter: 3.937 in (100 mm) 
Gear Ratio 180:1
Actuator Type Worm and Worm Gear
Travel Guide

Precision V-groove & Crossed Roller

Elevation Motor

Typical Phase Resistance 3.8 Ohms, Bi-directional
Typical Phase Current 1 Amp
DB-9 Male Connector
Pin Assignment and Description

1

+5 VDC

2

Channel-A of Encoder (Optional)

3

Channel-B of Encoder (Optional)

4

Common

5

HOME Switch, Open Collector, Normally Open, Needs 1K Pull up Resistor

6 Stepper Motor Phase A+
7 Stepper Motor Phase A-
8 Stepper Motor Phase B+
9 Stepper Motor Phase B-
Roll Motor

Typical Phase Resistance 3.8 Ohms, Bi-directional
Typical Phase Current 1 Amp
DB-9 Male Connector
Pin Assignment and Description

1

+5 VDC

2

Not Connected

3

Not Connected

4

Common

5

HOME Switch, Open Collector, Normally Open, Needs 1K Pull up Resistor

6 Stepper Motor Phase A+
7 Stepper Motor Phase A-
8 Stepper Motor Phase B+
9 Stepper Motor Phase B-
Base Material Aluminum Alloy
Surface Treatment Black Anodized
Load Capacity 20 kg
Weight with the Optional Bottom Plate 14.1 kg (31 lb)
Weight of the Bottom Plate 2.9 kg (6.3 lb)
Resolution 0.001° = 3.6 arcsec (10 Micro-steps per Step Motor Driver in use)
Maximum Speed of the Roll axis with Stepper Motor 12 °/sec
Maximum Speed of the Roll axis with Servo Motor 60 °/sec
Maximum Speed of the Azimuth axis with Stepper Motor 8 °/sec
Maximum Speed of the Azimuth Axis with Servo Motor 45 °/sec

Typical Accuracy

Accuracy 0.05° = 180 arcsec
 
Repeatability +/- 0.01° = +/- 36 arcsec
 


 Ordering Information

Part No. Description Amount
AU300-AR-01 Stepper Motor Driven Two-axis Gimbal Mount, Azimuth and Roll axes (Yaw and Roll Axes) Click to Get a Quote
AU300-AR-02 Three Phase Brushless Servo Motor with Quadrature Incremental Optical Encoder Driven Two-axis Gimbal Mount, Azimuth and Roll axes (Yaw and Roll Axes) Click to Get a Quote

Motion Controllers
Sharing link:


 

Home | Products | Accessories | Knowledge Center | About Us | Terms of Use |Testimonials | Featured Products |Site Map | Videos | Contact Us