|
| |
Motorized
Linear Vertical Stage
|
|
Home >
Motorized Vertical Single-axis Stages |
|
|
The AZ60-A Motorized Vertical Elevator Stage is a low-profile and compact 183.7 mm x 80 mm x 38 to 42-mm (raised) stage.
It
perfectly suited for low cost, high resolution, wedge type, vertical elevator applications requiring precise vertical positioning.
The
60 mm x 87 mm (2.362 in. x 3.425 in.) drilled and tapped stage has a vertical travel of 4 mm (0. 157 in.).
The crossed roller guides and a precision ground 8-mm-diameter 250 microns/turn lead ball screw provides smooth, straight (straightness to better than 5 microns). More after the jump.
The stage delivers good parallelism (<20 microns to the mounting surface), and high resolutions to 1.25 microns (full step), 0.625 microns (1/2 step), and 0.125 microns (1/10 micro step), and repeatability to +/- 0.5 microns. Travel speeds are up to 2.5 mm/sec.
The typical applications for the AZ60-A elevator stage include:
• Photonic alignment, wafer inspection, precision vertical alignment, laser marking
• Optical positioning, testing, inspection, assembly, sampling
• Laser drilling and machining in a broad range of industrial, medical, semiconductor, and research facilities
The AZ60-A Elevator Stage is constructed of black-anodized aluminum alloy and weighs just 1.14 kg (2.51 lb). A powerful NEMA 14 1.8° 2-phase stepper motor has a double ended shaft with a knob for manual adjustments. This knob may be replaced with a quadrature encoder for position verification. The non-cantilevered moving wedge elevator stage has a Load Capacity of 7 kg (15.43 lb) without concern for loss of parallelism, and the base plate has easy to access holes for mounting.
This product has been featured in the following sites, https://www.automation.com
https://en.ofweek.com
https://www.engineeringspecifier.com
https://www.linearmotiontips.com
|
|
Specifications
| Type |
AZ60 - A |
|
M
e
c
h
n
i
c
a
l
s
p
e
c |
Table Size |
87 X 60 mm |
| Range of Travel |
4 mm |
| Travel Guide |
Ball screw Φ8, lead 250 micron / turn |
| Runway |
Cross-roller lead-type |
| Load |
7 Kg |
| Body Weight |
1.14 Kg |
| Material |
Aluminum Alloy |
| Surface treatment |
Black Anodized |
|
T
y
p
i
c
a
l
P
r
e
c
i
s
i
o
n
S
p
e
c |
2-phase
resolution
(pulse) |
Resolution |
1.25 micron / 0.625 micron |
| Micro Stepping(1/10 step) |
0.125 micron |
| Parallelism |
20 micron |
| Maximum Speed |
2.5 mm / sec |
| Positioning Precision |
5 micron |
| Repeatability |
+/- 0.5 micron |
| Parallelism |
30 micron |
| Dynamic Straightness |
5 micron |
| Dynamic Parallelism |
20 micron |
Electrical Connection
| Pin No. |
Description |
| Two-Phase Stepper Motor (1.8°) |
35H36H-1004B |
| Typical Phase Resistance |
2.7 Ohms, Bi-directional |
| Typical Phase Current |
1 Amp |
DB-15
Male Connector
| Pin No. |
Description |
| 1 |
Stepper Motor Stepper Motor Phase A+ |
| 2 |
Stepper Motor Stepper Motor Phase A- |
| 3 |
Stepper Motor Stepper Motor Phase B+ |
| 4 |
Stepper Motor Stepper Motor Phase B- |
| 5 |
Not Connected |
| 5 |
Not Connected |
| 5 |
Not Connected |
| 8 |
Not Connected |
| 9 |
+5 VDC Power Input |
| 10 |
One Pulse per Motor Revolution, Open Collector. Normally High, Active Low |
| 11 |
+5 VDC Power Input Common |
| 12 |
Not Connected |
| 13 |
Not Connected |
| 14 |
Not Connected |
| 15 |
Not Connected |
|
|
Mechanical Drawing
 |
|
|
Ordering Information
|
Part No. |
Description |
Amount |
|
AZ60-A |
Stepper Motor Driven Linear Vertical Stage, Table Size
87 x 60 mm |
Click to Get a Quote |
|
Related Products
|
