|
|
Specifications
|
Structure
Description
|
Linear Travel |
|
Range of Travel (mm)
|
Pitch of Lead Screw
|
| 15 |
1
mm per turn
|
| 30 |
1
mm per turn
|
| 50 |
1
mm per turn
|
| 75 |
1
mm per turn
|
| Longer
than 100 |
4
mm per turn
|
|
|
Rotary Stage Range of Travel
|
360 Degree Continuous
|
| Travel Guide |
High Precision Crossed Roller |
| Motor
|
| |
|
Typical Phase Resistance
|
3.8 Ohms, Bi-directional
|
| Typical Phase Current |
1 Amp |
|
DB-9 Male Connector
|
|
Pin Assignment and Description
|
| 1 |
+5 VDC for the Limit Sensors |
| 2 |
CW Limit Switch, Open Collector, Normally Open, Needs Pull up Resistor (1000 Ohms)
|
| 3 |
CCW Limit Switch, Open Collector, Normally Open, Needs Pull up Resistor (1000 Ohms)
|
| 4 |
Return for+5 VDC
|
|
5
|
Not Connected
|
|
6
|
Stepper Motor Phase A+ |
| 7 |
Stepper Motor Phase A- |
| 8 |
Stepper Motor Phase B+ |
| 9 |
Stepper Motor Phase B- |
|
|
Body Material
|
Aluminum Alloy |
|
Surface Treatment
|
Black Anodized |
|
Typical Accuracy
|
Resolution |
Configuration Dependent |
|
Maximum Speed
|
5 mm / sec
|
| Repeatability |
10 microns
|
|
Positional Accuracy
|
10 microns
|
|
Accessories
Description
|
Optional Optical Encoders
Optional Servo Motors
Other Sizes and Strokes Available
|
|
|
