About Us

Knowledge Center


Terms of Use

Featured Products

Site Map


Contact Us

Motorized Rotary Stage

Home > Motorized Rotary Stages 

Solid Core Motorized Rotary Table, Stage Diameter: 2.362 in (60 mm)

This motorized rotary stage is made of aluminum alloy with an elegant black anodized surface.

The drive mechanism is worm and worm gear. The worm gear ratio is 90:1.

The maximum load of this rotary table is 30 Kg.

This 60 mm diameter rotary actuator has a body weight of 1.2 Kg.

The resolution of 0.002 degrees   is achieved with a 10 micro-steps per step stepper motor driver. This rotation stage is also available with a servo motor and optical encoder.

The top plate mounted indicator shows the angle of rotation.

The knob mounted on the motor allows for manual adjustment. This knob may be replaced with an optical encoder for precision position verification.

This motorized stage is capable of continuous spinning.

This stage requires a Motion Controller that can be ordered as a complete plug-and-play system with RS-232, USB, joystick, trackball, and keypad control..




Structure Description

Range of Travel

360 degrees

Stage Diameter  60 mm
Gear Ratio 90:1
Drive Mechanism

Worm Gear

Travel Guide Bearing
Stepper Motor

Two-Phase Stepper Motor (1.8 degrees )
Typical Phase Resistance  
Typical Phase Current  
DB-9 Male Connector
Pin Assignment and Description


+5 VDC for HOME Switch


Not Connected


Not Connected




HOME Switch, Open Collector, Normally Open, Needs 1K Pull up Resistor

6 Stepper Motor Phase A+
7 Stepper Motor Phase A-
8 Stepper Motor Phase B+
9 Stepper Motor Phase B-
Base Material Aluminum Alloy
Surface Treatment Black Anodized
Load Capacity 30 kg
Weight 1.2 kg

Typical Accuracy

Resolution 0.002 degrees  (Full Step)
 +/-0.01 degrees =3.6'' (20 Micro-steps per Step Motor Driver in use)
Repeatability +/-0.01 degrees
Positional Accuracy 0.05 degrees
Maximum Speed 30 degrees per second

Mechanical Drawing

Mechanical Drawing of Solid Core Motorized Rotary Table, Stage Diameter: 2.362 in (60 mm)

 Ordering Information


Part No. Description Amount
AY110-100-01 Stepper Motor Driven Hollow Core Rotary Stage, Stage Diameter: 60 mm Click to Get a Quote
AY110-100-02 Three Phase Brushless Servo Motor with Quadrature Incremental Optical Encoder Driven Rotary Stage, Stage Diameter: 60 mm Click to Get a Quote

Related Products
OES Line of Motion Controllers Motion Controllers
Sharing link:


Home | Products | Accessories | Knowledge Center | About Us | Terms of Use |Testimonials | Featured Products |Site Map | Videos | Contact Us