|
|
These
motorized
positioning tables
are made of
aluminum
alloy with
an elegant
black
anodized
surface.
They provide
up to 1000
mm of
travel.
The drive
mechanism is
high precision
crossed roller.
These
linear
stages are
also
available
with a servo
motors and
optical
encoders.
The knob mounted on the motors allow for manual adjustment.
These knobs may be replaced with an optical encoders for precision position verification.
This
series requires a
Motion Controller
that can be
ordered as a
complete
plug-and-play
system with
RS-232, USB,
joystick,
trackball,
and keypad
control. |
|
Specifications
|
Structure
Description |
Travel |
|
Range of
Travel (mm) |
Pitch of Lead
Screw |
Resolution |
| 15 |
1
mm per turn |
0.5 microns (10 Micro-steps per Step Motor Driver in use) |
| 30 |
1
mm per turn |
0.5 microns (10 Micro-steps per Step Motor Driver in use) |
| 50 |
1
mm per turn |
0.5 microns (10 Micro-steps per Step Motor Driver in use) |
| 75 |
1
mm per turn |
0.5 microns (10 Micro-steps per Step Motor Driver in use) |
| 100 |
4
mm per turn |
2 microns (10 Micro-steps per Step Motor Driver in use) |
| 150 |
4
mm per turn |
2 microns (10 Micro-steps per Step Motor Driver in use) |
| 200 |
4
mm per turn |
2 microns (10 Micro-steps per Step Motor Driver in use) |
| 300 |
4
mm per turn |
2 microns (10 Micro-steps per Step Motor Driver in use) |
| 400 |
5
mm per turn |
2.5 microns (10 Micro-steps per Step Motor Driver in use) |
| 500 |
5
mm per turn |
2.5 microns (10 Micro-steps per Step Motor Driver in use) |
| 600 |
5
mm
per turn |
2.5 microns (10 Micro-steps per Step Motor Driver in use) |
| 700 |
5
mm
per turn |
2.5 microns (10 Micro-steps per Step Motor Driver in use) |
| 800 |
5
mm
per turn |
2.5 microns (10 Micro-steps per Step Motor Driver in use) |
| 900 |
5
mm per turn |
2.5 microns (10 Micro-steps per Step Motor Driver in use) |
| 1000 |
5
mm per turn |
2.5 microns (10 Micro-steps per Step Motor Driver in use) |
|
| Travel Guide |
High Precision Crossed Roller |
|
DB-9 Male Connector
 |
| |
|
Typical Phase Resistance
|
3.8 Ohms, Bi-directional |
| Typical Phase Current |
1 Amp |
| |
|
Pin Assignment and Description |
| 1 |
+5 VDC for the Limit Sensors |
| 2 |
CW Limit Switch, Open Collector, Normally Open, Needs Pull up Resistor (1000 Ohms)
|
| 3 |
CCW Limit Switch, Open Collector, Normally Open, Needs Pull up Resistor (1000 Ohms)
|
| 4 |
Return for+5 VDC |
|
5 |
Not Connected |
|
6 |
Stepper Motor Phase A+ |
| 7 |
Stepper Motor Phase A- |
| 8 |
Stepper Motor Phase B+ |
| 9 |
Stepper Motor Phase B- |
|
| Body Material |
Aluminum Alloy |
| Surface Treatment |
Black Anodized |
|
Typical Accuracy
|
Resolution |
Configuration Dependent |
| Maximum Speed with Stepper Motor |
5 mm / sec |
|
Maximum Speed with Servo Motor |
|
| Repeatability |
1 microns |
| Positional Accuracy |
10 microns |
|
Accessories
Description
|
Optional Optical Encoders
Optional Servo Motors
|
|
Ordering
Information
|
Part No. |
Description |
|
|
XZ110-15 |
Stepper Motor Driven
Two-axis XZ-plane Stage, Travel
: 15 mm |
|
|
XZ110-30 |
Stepper Motor Driven
Two-axis XZ-plane Stage, Travel : 30 mm |
|
|
XZ110-50 |
Stepper Motor Driven
Two-axis XZ-plane Stage, Travel
: 50 mm |
|
|
XZ110-75 |
Stepper Motor Driven
Two-axis XZ-plane Stage, Travel
: 75 mm |
|
|
XZ140-100 |
Stepper Motor Driven
Linear Two-axis
XZ-plane
Stage, Travel :
100 mm |
|
|
XZ140-150 |
Stepper Motor Driven
Linear Two-axis
XZ-plane
Stage, Travel :
150 mm |
|
|
XZ140-200 |
Stepper Motor Driven
Linear Two-axis
XZ-plane
Stage, Travel :
200 mm |
|
|
XZ140-300 |
Stepper Motor Driven
Linear Two-axis
XZ-plane
Stage, Travel :
300 mm |
|
|
XZ140-400 |
Stepper Motor Driven
Linear Two-axis
XZ-plane
Stage, Travel :
400 mm |
|
|
XZ140-500
|
Stepper Motor Driven
Linear Two-axis
XZ-plane
Stage, Travel :
500 mm |
|
|
|
|
|
|
XZ-xxxx-zzzz-01 |
Stepper Motor Driven Two-axis XZ-axis Stage
xxxx
denotes the stroke of the X-axis in mm.
zzzz denotes the stroke of the
Z-axis in mm.
|
Click to Get a Quote |
|
XZ-xxxx-zzzz-02 |
Three Phase Brushless Servo Motor with Quadrature Incremental
Optical Encoder Driven Two-axis XZ-axis Stage
xxxx
denotes the stroke of the X-axis in mm.
zzzz
denotes the stroke of the
Z-axis in mm.
|
Click to Get a Quote |
|
XZ-xxxx-zzzz-03 |
DC Brush
Servo Motor with Quadrature Incremental Optical Encoder Driven Two-axis XZ-axis Stage
xxxx
denotes the stroke of the X-axis in mm.
zzzz
denotes the stroke of the
Z-axis in mm. |
Click to Get a Quote |
|
XZ-xxxx-zzzz-04 |
Stepper Motor Driven Two-axis XZ-axis Stage
with 500 Cycles per Revolution Quadrature Encoder Mounted at the
Back of Motor
xxxx denotes the stroke of the X-axis in mm.
zzzz denotes the stroke of the Z-axis in mm.
|
Click to Get a Quote |
|
|
|
