Motorized Dual-axis Linear Positioning Stages

These motorized positioning tables are made of aluminum alloy with an elegant black anodized surface. They provide up to 1000 mm of travel at a maximum speed of 50 mm per second. The drive mechanism is high precision crossed roller. These linear stages are also available with a Servo Motor (-02)s and optical encoders. The knob mounted on the motors allow for manual adjustment. These knobs may be replaced with optical encoders for precision position verification. This stage requires a Motion Controller that can be ordered as a complete plug-and-play system with RS-232, USB, joystick, trackball, and keypad control. Specifications Structure Description Travel Range of Travel (mm) Pitch of Lead Screw Resolution Maximum Speed 15 1 mm per turn 0.5 microns (10 Micro-steps per Step Motor Driver in use) 15 mm / sec 30 1 mm per turn 0.5 microns (10 Micro-steps per Step Motor Driver in use) 15 mm / sec 50 1 mm per turn 0.5 microns (10 Micro-steps per Step Motor Driver in use) 15 mm / sec 75 1 mm per turn 0.5 microns (10 Micro-steps per Step Motor Driver in use) 15 mm / sec 100 4 mm per turn 2 microns (10 Micro-steps per Step Motor Driver in use) 50 mm / sec 150 4 mm per turn 2 microns (10 Micro-steps per Step Motor Driver in use) 50 mm / sec 200 4 mm per turn 2 microns (10 Micro-steps per Step Motor Driver in use) 50 mm / sec 300 4 mm per turn 2 microns (10 Micro-steps per Step Motor Driver in use) 50 mm / sec 400 5 mm per turn 2 microns (10 Micro-steps per Step Motor Driver in use) 50 mm / sec 500 5 mm per turn 2 microns (10 Micro-steps per Step Motor Driver in use) 50 mm / sec Travel Guide High Precision Crossed Roller Motor   Typical Phase Resistance 3.8 Ohms, Bi-directional Typical Phase Current 1 Amp DB-9 Male Connector Pin Assignment and Description 1 +5 VDC for the Limit Sensors 2 Far End Limit Switch Open Collector or Normally Open Needs Pull up Resistor (typically 1000 Ohms) 3 Near Motor Limit Switch Open Collector or Normally Open Needs Pull up Resistor (typically 1000 Ohms) 4 Return for+5 VDC 5 Not Connected 6 Stepper Motor Phase A+ 7 Stepper Motor Phase A- 8 Stepper Motor Phase B+ 9 Stepper Motor Phase B- Body Material Aluminum Alloy Surface Treatment Black Anodized Typical Accuracy Resolution Configuration Dependent Repeatability 5 microns Positioning Accuracy 10 microns Accessories Description Optional Optical Encoders (-04) Other Sizes and Strokes Available Ordering Information Part No. Description   XY110-15 Stepper Motor Driven Two-axis XY-plane Stage, Travel  : 15 mm Click to Get a Quote XY110-30 Stepper Motor Driven Two-axis XY-plane Stage, Travel  : 30 mm Click to Get a Quote XY110-50 Stepper Motor Driven Two-axis XY-plane Stage, Travel  : 50 mm Click to Get a Quote XY110-75 Stepper Motor Driven Two-axis XY-plane Stage, Travel  : 75 mm Click to Get a Quote XY140-100 Stepper Motor Driven Linear Three-axis Stage, Travel  : 150 mm Click to Get a Quote XY140-150 Stepper Motor Driven Linear Three-axis Stage, Travel  : 150 mm Click to Get a Quote XY140-200 Stepper Motor Driven Linear Three-axis Stage, Travel  : 200 mm Click to Get a Quote XY140-300 Stepper Motor Driven Linear Three-axis Stage, Travel  : 300 mm Click to Get a Quote XY140-400 Stepper Motor Driven Linear Three-axis Stage, Travel  : 400 mm Click to Get a Quote XY140-500 Stepper Motor Driven Linear Three-axis Stage, Travel  : 500 mm Click to Get a Quote       XY-xxxx-yyyy-01 Stepper Motor Driven Two-axis XY-plane Stage xxxx denotes the stroke of the X-axis in mm. yyyy denotes the stroke of the Y-axis in mm. Click to Get a Quote XY-xxxx-yyyy-02 Three Phase Brushless Servo Motor with Quadrature Incremental Optical Encoder Driven Two-axis XY-plane Stage xxxx denotes the stroke of the X-axis in mm. yyyy denotes the stroke of the Y-axis in mm. Click to Get a Quote XY-xxxx-yyyy-03 DC Brush Servo Motor  with Quadrature Incremental Optical Encoder Driven Two-axis XY-plane Stage xxxx denotes the stroke of the X-axis in mm. yyyy denotes the stroke of the Y-axis in mm. Click to Get a Quote XY-xxxx-yyyy-04 Stepper Motor Driven Two-axis XY-plane Stage with 500 Cycles per Revolution Quadrature Optical Encoder Mounted at the back of the Stepper Motor xxxx denotes the stroke of the X-axis in mm. yyyy denotes the stroke of the Y-axis in mm. Click to Get a Quote