Motorized Linear Two-axis Stage Table 90 135 mm Table Stroke 75 mm


About Us

Knowledge Center


Terms of Use

Featured Products

Site Map


Contact Us

Motorized XY-plane Table

Home > Motorized Linear Stages > Low Cost Linear Two-axis Stages

This two-axis motorized positioning table is made of aluminum alloy with an elegant black anodized surface.

It provides 75 mm of travel at a maximum speed of 10 mm per second. The drive mechanism is lead screw.

The bench size is 90 X 110 mm and has a body weight of 6.1 Kg.

This linear stage is also available with a Servo Motor and optical encoder.

The knob mounted on the motor allows for manual adjustment. This knob may be replaced with an optical encoder for precision position verification.

This stage requires a Motion Controller that can be ordered as a complete plug-and-play system with RS-232, USB, joystick, trackball, and keypad control.

Video Demonstration




Structure Description


75 mm

Table Size 90110 mm
Lead Screw Pitch 1 mm per turn
Travel Guide

High Precision Crossed Roller


Two-Phase Stepper Motor (1.8)
Phase Resistance 3.8 Ohm, Bi-directional
Maximum Phase Current 1 Amp
9 pin DB-9 Male Connector
Pin Assignment and Description
1 +5 VDC for the Limit Sensors
2 Positive Limit Switch, Open Collector, Normally Open, Needs Pull up Resistor (1000 OHM)
3 Negative Limit Switch, Open Collector, Normally Open, Needs Pull up Resistor (1000 OHM)
4 Return for+5 VDC
5 Not Connected
6 Motor Phase A+
7 Motor Phase A-
8 Motor Phase B+
9 Motor Phase B-
Main Material Aluminum Alloy
Surface Treatment Black Anodized
Load Capacity  
Weight 4.2 kg

Typical Accuracy

Resolution Control Electronics Dependent, 0.5 microns with 10 Micro-steps per Step Motor Driver in use
0.25 microns with 20 Micro-steps per Step Motor Driver in use
Maximum Speed 10 mm/sec
Repeatability 5 microns
Positional Accuracy 10 microns

Accessories Description

Servo Motor (-02)

Optical Encoder


Stepper Motor Driven Mechanical Drawing

Motorized Two-axis XY Stage, Travel  : 75 mm

Click to Get the STEP file of XY110-75.

 Ordering Information

Part No. Description Amount
XY110-75 Stepper Motor Driven Two-axis XY-plane Stage, Travel  : 75 mm Click to Get a Quote

Motion Controllers
Sharing link:


Home | Products | Accessories | Knowledge Center | About Us | Terms of Use |Testimonials | Featured Products |Site Map | Videos | Contact Us

                    facebook X linkedin youtube